Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9272872
- Product Categories
- Friendly Links
Information Name: | To supply Beijing interface agent manufacturers |
Published: | 2013-03-07 |
Validity: | 300000 |
Specifications: | 50 kg |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | Interface agent manufacturers, 108 plastic manufacturers, tile adhesive, contact; Mr.Liu 13716204855 Products dry powder interface agent is a composite made from high-performance cement-based composites and resin-based modified materials, can greatly improve the new The combination of old concrete interface, enhanced bond strength of new and old concrete. Dry powder interface agent integrated use of today's concrete state-of-the-art, high-performance cement-based composites technology, the interface modification technology, technology, the company more than it seems painstaking research, the development of new products to improve the interfacial bond. Second, the new product uses the old concrete interface processing. New, old concrete and other inorganic materials (such as stone) interface processing. New, old mortar interface processing. Aerated concrete block interface need to improve the interfacial bond. Features of the first with the resin-modified materials processing interface of old and new structures, greatly improve the interfacial bond strength. Expansive concrete technology itself does not produce a contraction. The use of high-strength concrete and high performance concrete technology, greatly improve the concrete strength and other properties of the interfacial region. Construction operation is simple, fast the interface treatment effect was applicable conditions: 1, applies to the bond between the old and new concrete. 2, surface treatment, should be chiseled surface layer of concrete or mortar, the surface should be rough and clean. The front surface to fully wetting the surface is wet, no water film is appropriate. Help, before the construction of the concrete surface should be dust, oil and other clean, so as not to affect the bond strength. Summer construction or wall drier, construction should be preceded dampen the surface with water. The water interface agent transferred into a thick paste, water-cement ratio of about 1:3, stir and stand for 5-10 minutes, pending interface agent thickens then stir a little, you can use. 4, after the mix interface agent fender smear the concrete base surface, the thickness of approximately :2-2.5 mm (less than 2 mm), the closing pulp (typically 90 minutes, depending on environmental conditions) to smear a layer of cement mortar. If the the leveling layer thickness is greater than 10 mm, layered smear, the amount of about 2-3 kilograms per square meter. 5, special attention not rain for outdoor construction. Construction temperature should be above 5 ℃. |
Admin>>>
You are the 13242 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Red Henan Lu Building Material Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 13242 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Red Henan Lu Building Material Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility